Upcycle Ecocharger DIY Kit + 250 Watt Grid-Tied Kit


This kit combines the DIY Kit with the 250 Watt Grid-Tied Kit

Attach almost any bike – For kids and most adults

  • Stable and durable
  • Plugs into any wall outlet
  • Provides resistance as RPM’s go up
  • Shuts off for safety when power is out

The grid-tie inverter can transfer wind energy from bicycle generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the bicycle generator. It produces a pure sine-wave and matches that of the grid.

This model grid-tie has built-in bridge rectifier and dump load controller. It can maintain the rotating speed of the wind turbine and keep the voltage from the bicycle generator always at the range of the rated range of the grid tie inverter.

There are 5 terminals on the left side of the inverter, 3 red terminals will be connected to the three phase output from the bicycle generator, and 2 black terminals will be connected to dump load resistors.

There are 4 LED indicators, 3 green indicators and 1 red indicator, 3 green LED indicators will start to cycle from left to right when the grid and AC input supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the bicycle generator. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called “Island Protection.”


Our most popular DIY kit. Simple setup and works great for kids and adults.